When the key to your house or office breaks off in the lock, you instantly starting feel dreadful and helpless. But if you are armed with the right knowledge on removing a broken key out locks, this issue will not give you any headache at all. There are many ways to tackle this problem and the kind of situations will determine the most suitable way. Explained as follows are some of the ways you can employ to solve this challenge:
Stop Using the Key
Many people have the erroneous belief that even if a key gets broken in the lock, it (the lock) would still open when one inserts the remaining part of the key. Don’t try this! When you try reinserting the key, you’ll push the part of the blade that is broken deeper into your lock.
Every method stated in this write-up will work a lot easier and quicker the shallower your key gets inserted. The farther back it is, the more difficult the removal will be. Based on the level deep the key has been forced into the lock, few of these tips may not work.
Insert the part of the broken key with you into your pocket or put it down. You don’t need to make use of this piece. But, you shouldn’t toss it away. Keep this half so that you can provide both parts to a locksmith. A locksmith will cut a new key for you using both pieces.
Though this step is optional, it’ll make the procedure easier. Start by the application of a lubricant to your keyway. This lubricant should normally employ graphite spray lubricant or other types of dry lubrication. Oil-based lubricants like standard WD-40 are also effective, but they can make the internal components of the lock gum up. After a short while, there could be an issue affecting how smooth the plug rotation is.
The only flaw that a graphite spray has is, it’ll stain things quite easily. Ensure the nozzle of the lubricant has been lined up so it’s inside the key-way before spraying it. Also, you’ll need a paper towel or rag for removing any of the excess lube spilling out of this key-way. You should also grab a pair of needle nose pliers as this tool will be help in removing it faster. Once you are sure that a sufficient part of the key is accessible, simply pull it free using the pliers.
These are a few tools you need to have with you, or close by you which will assist you in removing the key out of your lock:
• Bobby pin
• Metal hair clip
• Safety pin
• Paper clip
• Locksmith pick
• Swiss army knife
• First aid kit
• Super glue
• Broken key extractor
• Jigsaw blade
And that is about it. We hope that you have enjoyed reading this locksmith blog article!