Garage door openers are a staple in most homes, but what do you do when yours breaks?
You know the drill- you come home from work and your garage is inaccessible because the opener is broken.
You have to call a repairman and wait for them to show up, which can take hours or even days.
Austin Car Key Pros has the solution for you! We offer fast and affordable garage door opener installation that will have your garage up and running in no time.
Plus, we offer a wide variety of brands and models so that you can find the perfect opener for your needs.
An automatic garage door opener can be an effective way to upgrade your home. It is an easy and affordable project that improves the look of your house while also giving you more convenience.
You will want to select a new garage door opener that is right for you, but you might not know how to install it correctly.
Fortunately, the process is not complicated and it can be done by yourself with a few hours of your time.
Frequently asks questions about How to Install a New Garage Door Opener by Yourself
How do I install my new garage door opener?
- Find your old remote and reset the frequency on it with the code that came with the opener. Use this until you get a new remote. If you don’t, your current one may not work and you’ll need to contact a repairman anyway.
- You will need to make sure that your power is turned off before trying to install the opener. This includes disconnecting your transformer from its power source in order to avoid any accidents with potentially live wires.
- Open the main panel box of your garage door (this is where all of the wirings is). Your battery or fuse should be inside remove it just long enough for installation. Carefully put it back inside.
- You will want to identify which wire is for the button on your opener and the one that goes to your light. The code you used should tell you which switch opens and closes the door. Stick a piece of tape above or below each one so you don’t mix them up during installation.
- Get a good grip on the opener and carefully position it in front of where it will be going inside your garage door opening. Make sure all cords are hanging correctly before attaching any screws, as this can cause damage or malfunction if done incorrectly.
- Drill into place as far as possible with just your bare hands, then use a screwdriver to tighten the screws all the way.
- Slide in your battery and plug it in, and you should be ready to go!
What is the best model for my home?
Depending on how frequently you use your garage door, there are a few different types of openers for different needs. A light-duty opener is great for infrequent use or if you only need to get into the garage occasionally.
It is also perfect for smaller garages that hardly see any traffic beyond one car. These models tend to be lighter but they will not last as long as more heavy-duty varieties, which makes them a good choice for tight budgets.
They can operate with sensors so that you never have to worry about hitting anything when opening or closing the door, which can help you avoid damage to the garage or carport. A medium-duty opener is ideal for people who are looking for a workhorse solution to their garage.
These models are usually more expensive, but they are built to stand up to daily use and abuse without breaking down easily.
They tend to be much stronger than other options, so if you have heavy objects that might need put away in your garage this could be right for you.
What kind of warranty should I look for?
You will want an opener with great warranties since this item is likely not one that you will replace anytime soon. Look for at least three years on parts and labor as well as free customer service calls for one year after purchasing it.
You should also be able to get a minimum of 30 days for your money back if you are not completely satisfied.
When choosing an opener, take these warranty requirements into consideration so that you know how much service you will receive in the future.
What other features should I look for?
Since openers can vary greatly depending on which one you choose, it is important to know what features will help enhance your life with this device. A low-noise model is just as important as looking at warranty periods or price points.
If you have children or pets that are afraid of loud noises then consider having an opener installed that has little impact on the surrounding environment.
How difficult is it to replace a garage door opener?
Installing your own garage door opener is not extremely difficult but it does require that you be able to safely handle electricity without causing yourself or anyone else harm.
As long as you are aware of this, then it should be fairly easy for you to successfully complete the task.
If you are still unsure about whether or not you will need any help, consider asking a friend or family member who may be able to lend their hand.
How can I stay safe while installing my garage door opener?
There are many ways in which you can take proper safety precautions when trying to install an automatic home device like this one. First and foremost, make sure that everything is unplugged before attempting anything; even lighting devices should be checked.
Once you are sure that everything is no longer working, you will want to mark all of the wires so that there are no accidents while you are trying to install it.
If any cords do not fit in easily, be sure to cut them with wire snips than can handle metal and rubber without fraying or coming apart. Once everything has been set up properly then you should be safe from electrical malfunctions when installing your own opener.
The most important part about staying safe when trying to do this task yourself is having an idea of where all of the wiring goes so that nothing comes apart in the start-up process. Take the time to look over your new garage door opener before testing it out!
How much time does getting a new garage door opener to take?
If you are able to get all of the supplies that you need before starting, then this project will likely not take any longer than half an hour.
You will want to make sure that everything is put in its proper place so that your new opener does not fall apart when it is turned on.
Do you need a professional to install a garage door opener?
Installing a garage door opener is not that difficult and can even be done without any help.
However, it does require that you know what to do with wiring and hardware so if anything goes wrong you can easily fix it without needing professional help.
What is the easiest way to install a garage door opener?
If you are not sure about what to do when it comes to installing an automatic door opener, then reaching out to a professional is likely your best option.
Professional companies that specialize in garage door installation can provide you with all of the hardware that you will need as well as the service required to properly install it onto your home.
It should be noted though that if you have already purchased your own equipment and have no help available to you at the time, then determining how to install it yourself without any assistance is definitely possible. Just make sure not to rush or overlook crucial steps so that everything functions as intended!
You will want someone nearby who knows about electricity and power tools such as a family member or friend (if they know what they are doing). When you feel like your opener is ready to be tested, make sure that there is no one inside the garage and try it out. If you notice anything wrong or hear strange sounds then stop testing it right away and check for any problems.
How much money does it cost to install a new garage door opener?
A professionally installed garage door opener can cost up to $100 whereas if done by yourself, the price range falls between $25 and $75. The exact amount will depend on what kind of equipment you purchase and how much help you have when installing it.
If you don’t mind spending a few extra bucks for peace of mind when trying to complete this task, consider asking your friend or family member to help you out and split the costs in half with you!
The most important thing about saving money when installing a garage door opener is that if anything goes wrong then you will be able to fix it quickly since you know what tools and parts were necessary for its completion.
Can you put a garage door opener on an old garage door?
Yes, as long as you purchase a garage door opener that matches your current ones.
Garage door openers must be compatible with any type of garage door and fit within the track properly so that they function correctly and safely for anyone inside the garage.
Doing this yourself is possible if you do not mind finding all of the parts and equipment necessary to make it work. Just remember to work slowly and test everything before closing up shop to ensure there are no problems!
How long does it take if I install my garage door opener?
It should take a maximum of half an hour to install a garage door opener as long as you have everything prepared and already available.
Keep in mind that if there is anything wrong with your new equipment or something doesn’t work quite right, it could take much longer than that to resolve the problem.
If this ends up being the case then consider asking for help from family or friends who know more about power tools and wiring!
What is the easiest way to install a garage door opener?
The safest and most efficient way to install a garage door opener is by calling upon professionals who specialize in this task. This ensures that no problems will arise afterward and everything works as intended!
If you don’t mind spending money on your safety, then it is always best to hire help since most accidents occur due to not taking recommended precautions or using faulty equipment.
To do all of this yourself, you must be confident about what you are doing and know how to properly use every single piece of added hardware.
Make sure that if anything goes wrong with your new opener, there is someone nearby who knows more than you so they can identify the problem and fix it properly!
Can you put a garage door opener on an old garage door?
It depends on the type of opener that you are interested in getting for your garage. There are both chain-driven and belt-driven openers available but if they don’t fit inside of your current track then there is no point in purchasing them.
Chain drive openers tend to be easier to install by yourself whereas belt drives cannot be installed without using special tools or having help from someone who knows how to do this task already.
Do you need to install a new garage door opener?
Installing a new garage door opener is easier than ever. We’ll show you how in this step-by-step guide! You can do it yourself and save money on installation fees. It only takes about an hour, and we’re here to help if you get stuck.
There are many reasons why people choose not to hire professionals for their home projects. They might be short on time or they don’t want the hassle of coordinating with multiple contractors at once.
Whatever your reason may be, we understand that sometimes DIY is just more convenient for busy homeowners like yourself!
That’s why our team has created this easy-to-follow guide so that anyone can successfully install a new garage door opener by themselves without any prior experience or knowledge of electrical work required!
All you need is some tools from your local hardware store and the instructions below…and voila – your brand new garage door will open up in no time flat!
Let us know how it goes when you finish installing yours today 🙂
\